Proceedings 2025 | Peers Int.

Computer Simulation in the Chemical Technology and Engineering
Airflow and Mass Transfer Modeling as a Tool for Analyzing Drug Aerosolization and Delivery Tomasz Sosnowski, Agata Dorosz, Arkadiusz Moskal, Maciej Małecki https://doi.org/10.23939/cte2025.01.030 pp. 30-33
Simulation of the Ultrafiltration Process: Modern Level and Development Trends Sherhii Huliienko https://doi.org/10.23939/cte2025.01.034 pp. 34-37
Мathematical Modeling of Heat and Mass Transfer and Phase Transformations in the Condensation Zone of a Heat Pipe Natalia Sorokova, Konstantin Polovynkin, Julia Kolchyk https://doi.org/10.23939/cte2025.01.038 pp. 38-42
Topological Optimization of Mass Characteristics of a Lower Limb Prosthesis Stump Receiver Using SolidWorks Anastasiia Kucherenko, Anastasiia Boshchuk, Volodymyr Hlovatskyi, Vitaliy Korendiy, Volodymyr Moravskyi https://doi.org/10.23939/cte2025.01.043 pp. 43-46
AI-Driven Predictive Modeling for Biomass Carbon Sequestration and Decarbonization Mykhailo Hurei https://doi.org/10.23939/cte2025.01.047 pp. 47-52
Molecular Dynamics Modeling as an Innovative Approach to Solving Problems in Ecology Hlib Teteriatnykov, Anton Karvatskii, Olena Ivanenko https://doi.org/10.23939/cte2025.01.053 pp. 53-56
Modeling the Operation of Glass Furnaces in Order to Optimize Technological Processes Nataliia Zhdaniuk, Oleksii Plemyannikov https://doi.org/10.23939/cte2025.01.057 pp. 57-60
The Influence of Chan’nel Curvature and Spacer Geometry on Flow Characteristics in Membrane Module Channels Vitaliy Yasenchuk, Sergiy Huliienko https://doi.org/10.23939/cte2025.01.061 pp. 61-64
Molecular Modeling of Polymethylmethacrylate-Polyaniline Composites and Study of its Properties Volodymyr Dutka, Yaroslav Kovalskyi, Halyna Halechko, Oleh Khamar https://doi.org/10.23939/cte2025.01.065 pp. 65-68

Development, Energy and Resource Saving in the Chemical and Food Technologies
Design and Development of a High-Concentration Aqueous Ammonia Solution Production Plant Oleksandr Mandryka, Maksym Skydanenko, Oleksandr Liaposhchenko https://doi.org/10.23939/cte2025.01.070 pp. 70-77
Interrelation of Quality Indicators of Coal Charge and Blast Furnace Coke Illia Avdeiuk, Denys Miroshnychenko https://doi.org/10.23939/cte2025.01.078 pp. 78-81
Development and Optimization of Lithium Aluminosilicate Glass-Ceramic Materials with High β-Spodumene Content for Armor Protection Sviatoslav Riabinin, Artem Zakharov, Mykyta Maistat https://doi.org/10.23939/cte2025.01.082 pp. 82-85
Kinetics of Filtration Drying of Wild Carrot Pomace Alina Denysiuk, Volodymyr Atamanyuk https://doi.org/10.23939/cte2025.01.086 pp. 86-89
Development of Bio-Based Epoxy Thermosetting Materials Based on Imine Bonds Anastasiia Pidvorotnia, Roxana Dinu, Sandu Cibotaru, David D. Swanson, Alice Mija https://doi.org/10.23939/cte2025.01.090 pp. 90-93
Research on a Combined System with a Hybrid Solar Collector Stepan Mysak, Stepan Shapoval, Anna Hyvliud https://doi.org/10.23939/cte2025.01.094 pp. 94-98
Optimizing Coal Fine Properties for Industrial Applications Through Chemical Treatments Nataliya Korol, Viktor Yankovych https://doi.org/10.23939/cte2025.01.099 pp. 99-103
Preparation and Structure of Chitosan-Based Porous Scaffolds for Potential Application in the Treatment for Diabetic Foot Complications Zoia Haholkina, Maite Rico, Rebeca Bouza https://doi.org/10.23939/cte2025.01.104 pp. 104-107
Plant Oil-Based Polymers: Synthesis, Structure, and Temperature-Responsive Properties Near Physiological Temperatures Anastasiia Chebotar, Bohdan Domnich, Yurij Panchenko, Volodymyr Donchak, Yurij Stetsyshyn, Andriy Voronov https://doi.org/10.23939/cte2025.01.108 pp. 108-111
Mass Transfer During the Dissolution of Ammonium Tetrafluoroborate, Based on the Theory of Locally Isotropic Turbulence Oleksandr Kuzyk, Yaroslav Gumnitsky https://doi.org/10.23939/cte2025.01.112 pp. 112-117
Pressure Influence on the Carbon Gasification Process Nazar Lysyy, Andriy Helesh, Vasyl Popovych https://doi.org/10.23939/cte2025.01.118 pp. 118-122
QM/MM Study of the Cyclization Reaction Mechanism for Pimelic o-Aminobenzamide Histone Deacetylase (HDAC) Inhibitor 4b Olena Klenina, Laura Márquez Cantudo, Claire Coderch, Beatriz de Pascual-Teresa Fernandez https://doi.org/10.23939/cte2025.01.123 pp. 123-131
Lignocellulous Raw Materials and Its Wastes Transformation Into Value-Added Products Bohdan Korinenko, Tetiana Tkachenko, Oleksandr Pavliuk, Dmytro Kamenskyh, Vitalii Yevdokymenko https://doi.org/10.23939/cte2025.01.132 pp. 132-137
Diffusive Mass Transfer During Filtration Drying of Match Splints Tetiana Kuzminchuk https://doi.org/10.23939/cte2025.01.138 pp. 138-141
Evaluation of the Effect of Technical Lignin on the Properties of Petroleum Bitumen Myroslava Donchenko, Yuriy Prysiazhnyi, Andriy Nagurskyy, Taras Chipko https://doi.org/10.23939/cte2025.01.142 pp. 142-145
Synthesis and Properties of Latex Composites Filled with PVA Hydrogel and Keratin Oleksandra Dzeikala, Mirosława Prochoń https://doi.org/10.23939/cte2025.01.146 pp. 146-149
Formation of Specific Electrical Resistance of Blast Furnace Coke Under the Influence of Raw Materials and Technological Factors of Its Production Yevhen Soloviov, Denys Miroshnychenko https://doi.org/10.23939/cte2025.01.150 pp. 150-153
Intensification of Evaporation of Sulfuric Acid Solutions Andriy Helesh, Roksoliana Bukliv, Yaroslav Kalymon, Oksana Kurylets https://doi.org/10.23939/cte2025.01.154 pp. 154-159
Mechanical Properties of Biodegradable Films Based on Polyvinyl Alcohol and Starch Oleksandra Krykhovets, Vyacheslav Repeta https://doi.org/10.23939/cte2025.01.160 pp. 160-163
Processing of Petroleum-Containing Waste by Low-Temperature Pyrolysis Method Oleg Grynyshyn, Andrii Kopach, Yuriy Znak, Taras Chervinskyy https://doi.org/10.23939/cte2025.01.164 pp. 164-167
Study of Mechanical Properties of Starch-Based Biodegradable Films and Their Degradation Under UV Radiation Valentyna Slobodianyk https://doi.org/10.23939/cte2025.01.168 pp. 168-171

The Innovations, Nanotechnologies, and Catalysis in the Chemical and Food Industries
Study of Gas-Dynamic Throttle Elements as Sensors for Nanotechnology Processes Ivan Stasiuk, Ihor Dilai, Roman Brylynskyi, Solomiia Markiv https://doi.org/10.23939/cte2025.01.173 pp. 173-179
Innovative Techniques For Producing Yogurts With Increased Nutritional Value Dariia Kichura, Roman Subtelnyy https://doi.org/10.23939/cte2025.01.180 pp. 180-183
Study of the Wine Clarification Process with Bentonite Khrystyna Frys, Oksana Nahurska, Olha Fedotova https://doi.org/10.23939/cte2025.01.184 pp. 184-188
Sol-Gel Synthesis of Organic/Inorganic Materials with High Proton Conductivity Mariia Zhyhailo, Iryna Yevchuk, Oksana Makota https://doi.org/10.23939/cte2025.01.189 pp. 189-194
Hydrothermal and Mechanochemical Modification as a Tool for Preparing ZrO2 with Desired Physicochemical Characteristics and Improved Photocatalytic Properties Volodymyr Sydorchuk, Joanna Olszowka, Svitlana Khalameida, Svitlana Levytska, Stefan Vajda https://doi.org/10.23939/cte2025.01.195 pp. 195-198
Crystallization Parameters of CsPbBrCl2 Melt Oleh Kopach, Vasylyna Kopach, Taras Diiakoniuk, Petro Fochuk https://doi.org/10.23939/cte2025.01.199 pp. 199-203
Effect of Chemical Etching on Photoinduced Modulation of Subterahertz Radiation by Crystalline Germanium Roksoliana Bukliv, Oksana Balaban, Bohdan Venhryn, Dmytro Vynnyk, Andriy Danylov https://doi.org/10.23939/cte2025.01.204 pp. 204-208
Temperature Influence on the Rheological Properties of C9 Hydrocarbon Resin Solutions Roman Subtelnyy, Dariia Kichura, Bohdan Dzinyak https://doi.org/10.23939/cte2025.01.209 pp. 209-212
Studying the Rheological Behaviour of Polyamide Nanocomposites Natalia Chopyk, Victoria Zemke, Mykhaylo Bratychak https://doi.org/10.23939/cte2025.01.213 pp. 213-216
Characterization of Miscanthus Biomass Waste -Derived Biochar Produced by Oxydative Pyrolysis: Implications for Carbon Sequestration Valentyna Pidlisnyuk, Tatyana Stefanovska, Volodymyr Klius, Larysa Borysenko, Artem Medkov https://doi.org/10.23939/cte2025.01.217 pp. 217-221
Prospects of Sulfur Nanoparticles Application in the Technology of Food Emulsion Systems Erika Boichuk, Anastasiia Sachko, Viktoriia Pylypko, Yuriy Khalavka https://doi.org/10.23939/cte2025.01.222 pp. 222-227
La-Modified Cu/ZnO/Al2O3 System as the Modern Heterogeneous Catalysts for Water-Gas Shift Process Pawel Kowalik, Katarzyna Anotniak-Jurak, Anna Mrozek, Piotr Baran https://doi.org/10.23939/cte2025.01.228 pp. 228-231
New Types of Cold-Applied Bituminous Roofing Materials Dmytro Aleksandrov, Yuriy Khlibyshyn, Volodymyr Yuzyfyshyn, Andrii Nahurskyi, Oleg Grynyshyn https://doi.org/10.23939/cte2025.01.232 pp. 232-235
Luminescent Determination of 4-Nitrophenol in Water Using AgInS2 and CuInS2 Nanoparticles Vasylyna Kopach, Yuriy Khalavka, Anastasiia Piasetska https://doi.org/10.23939/cte2025.01.236 pp. 236-239
Selenium-Modified Microgels: Novel Catalysts for Cross-Phase Oxidation of Aromatic Aldehydes Anastasiia Pavliuk, Oliver Fiukowski, Volodymyr Ivasiv, Roman Nebesnyi, Andrij Pich https://doi.org/10.23939/cte2025.01.240 pp. 240-244
Tuning Excited-State Proton Transfer in 3-Hydroxyflavones by Inclusion into β-Cyclodextrins Arsenii Snizhko, Liudmyla Chepeleva, Eugene Gladkov, Alexander Kyrychenko https://doi.org/10.23939/cte2025.01.245 pp. 245-249
Design of Polyfunctional Catalysts for C2, C4 (Bio)alcohols' Conversion into Valuable Alkenes and Oxygenates Olga Larina, Karina Valihura, Oksana Zikrata, Svitlana Orlyk, Sergiy Soloviev https://doi.org/10.23939/cte2025.01.250 pp. 250-253
Degradation Changes in the Crystal and Electronic Structure of Lead Iodide Perovskite Volodymyr Karbivskyy, Svitlana Smolyak, Arsen Soroka, Nazar Shvachko, Oleksii Ivanov https://doi.org/10.23939/cte2025.01.254 pp. 254-257
Investigation of Suspensions of Mixed Iron Oxide/Manganese Oxide and Iron Oxide/Cobalt Oxide Nanoparticles in Aqueous Surfactant Solutions and Their Use for Mixer Studies in Liquids Feeds Tamara Sakhno, Valentina Panchenko, Nikolay Barashkov, Yuriy Sakhno https://doi.org/10.23939/cte2025.01.258 pp. 258-261
Catalytic Properties of CeO2 and Its Nanocomposites with SBA-15 Mesoporous Molecular Sieve in Cyclic Carbamates Production from CO2 and Aminoalcohols Mykhailo Kurmach, Dmytro Kyryliuk, Pavlo Yaremov, Oleksiy Shvets, Nataliya Shcherban https://doi.org/10.23939/cte2025.01.262 pp. 262-267
Research on the Cracking of Heavy Oil Fractions Activated by Atmospheric Oxygen Vasyl Konyk, Yuriy Khlibyshyn https://doi.org/10.23939/cte2025.01.268 pp. 268-271
Effect of Acrylic Monomer Formulation on Photocuring and Water Swelling Ability of PVA Hydrogel Vasyl Vaskiv, Dmytro Saiuk, Viktor Tokarev https://doi.org/10.23939/cte2025.01.272 pp. 272-278
Preparing the Organic-Inorganic Hybrid Perovskites for the Effective Solar Cell Volodymyr Karbivskyy, Oleksii Ivanov, Nazar Shvachko, Nataliia Kurgan, Serhii Shulyma https://doi.org/10.23939/cte2025.01.279 pp. 279-284
Constant Magnetic Field Influence on (Meth)Acrylic Esters Polymerisation in the Presence of Polyvinylpyrrolidone Galyna Dudok, Natalia Semenyuk, Taras Behei, Volodymyr Skorokhoda https://doi.org/10.23939/cte2025.01.285 pp. 285-290
Fundamentals of the Technology of Obtaining Interactive Materials for Use in Catalysis and Biosensors in the Context of Food Freshness Assessment Iryna Kirina, Khrystyna Frys, Oksana Nahurska, Volodymyr Ivasiv, Roman Nebesnyi https://doi.org/10.23939/cte2025.01.291 pp. 291-294
Influence of Dispersion Medium Parameters on Suspension Polymerization of Methacrylic Esters in Presence of Polyvinylpyrrolidone Nataliya Semenyuk, Galyna Dudok, Volodymyr Malynovskyi, Nazar Shalata, Volodymyr Skorokhoda https://doi.org/10.23939/cte2025.01.295 pp. 295-300

Optimization of Biochemical Processes and Bioengineering
Exploring the Potential of Organophosphorus Compounds as Chelators for Enhancing Zinc Bioavailability in Agriculture Magdalena Tymoszewicz, Ewelina Klem-Marciniak, Marta Huculak-Mączka, Tomasz Olszewski https://doi.org/10.23939/cte2025.01.302 pp. 302-307
Biocatalytic Method for the Synthesis of Enantiomerically Pure β-Methyl-phenylethylamines Oleh Faiziiev, Anastasiia Kolodiazhna, Dmytro Prysiazhnuk https://doi.org/10.23939/cte2025.01.308 pp. 308-312
Enhancing Mechanical Properties of Biopolymer-Based Composites: The Influence of Organic and Inorganic Additives Szymon Szczepanik, Mirosława Prochoń https://doi.org/10.23939/cte2025.01.313 pp. 313-317
Organs-on-a-Chip in the Study of Ophthalmic Diseases Marharyta Chalenko, Olena Golembiovska https://doi.org/10.23939/cte2025.01.318 pp. 318-323
Enzymatic Synthesis is a Method for Obtaining Optically Active Compounds Anastasiia Kolodiazhna https://doi.org/10.23939/cte2025.01.324 pp. 324-331
Preparation of Enantiomerically Pure 3-Heteryl-2-Methylpropanoic and 3-Heterylbutanoic Acids by Enzymatic Kinetic Resolution Oleh Faiziiev, Anastasiia Kolodiazhna, Dmytro Prysiazhnuk https://doi.org/10.23939/cte2025.01.332 pp. 332-336
The Content of Antocyanins and Ascorbic Acid in Extract of Malva Sylvestris L. Obtained by Enzyme-Assisted Extraction Anastasiia Kulakivska, Roksolana Konechna https://doi.org/10.23939/cte2025.01.337 pp. 337-340

Green Chemistry
Design and Research of Eco-Friendly Biodegradable Composites Based on Renewable Biopolymer Materials and Reed Waste Artem Kariev, Volodymyr Lebedev, Yevgen Sokol, Magomediemin Gasanov, Аnna Cherkashina https://doi.org/10.23939/cte2025.01.342 pp. 342-348
The Analysis of Green Metrics Indices of Chemical Technologies: Accountability of Environmental Performance and Sustainability Assessments Marharyta Radomska, Oksana Tykhenko https://doi.org/10.23939/cte2025.01.349 pp. 349-353
Comparison of Selected Physicochemical Properties of Green Clay After Mechanochemical Treatment with the Finished Composite Based on Green Clay and Hydroxyapatite Obtained by the Wet Method Klaudia Kowalska, Ewa Skwarek https://doi.org/10.23939/cte2025.01.354 pp. 354-359
Closing the Recycling Loop of PEM Electrolyzer: Synthesis of Ir Precursor from Spent Electrocatalyst Lesia Sandig-Predzymirska, Alexandros Charitos https://doi.org/10.23939/cte2025.01.360 pp. 360-363
Animal Fats and Vegetable Oils – Promising Resources for Obtaining Effective Corrosion Inhibitors for Oil Refinery Equipment Serhiy Pyshyev, Oleksandr Romanchuk, Petro Topilnytskyy, Viktoriya Romanchuk, Denis Miroshnichenko, Yurii Rohovyi, Hennadii Omelianchuk, Yurii Parkhomov https://doi.org/10.23939/cte2025.01.364 pp. 364-369

Alternative and Non-Conventional Energy Sources
The Characteristics of Banana Peel-Derived Carbon and Its Potential Utility in Energy Storage Devices Xymena Gross, Beata Kurc https://doi.org/10.23939/cte2025.01.371 pp. 371-374
Methods of Biogas Purification and Enhancement Pavlo Holubiev, Andriy Slyuzar https://doi.org/10.23939/cte2025.01.375 pp. 375-380
Pyrolysis of Waste Tires: Product Characteristics and Industrial Applications Bohdan Korchak, Serhiy Pyshyev, Yurii Lypko https://doi.org/10.23939/cte2025.01.381 pp. 381-384
Investigation of the Energy Characteristics of Sunflower Stalks and Their Separated Tissues as Lignocellulosic Raw Materials for Solid Biofuel Production Diana Kindzera, Roman Hosovskyi, Viktoria Kochubei https://doi.org/10.23939/cte2025.01.385 pp. 385-388
The Influence of Dehydration Mode on the Duration of the Drying Process of Protein-Containing Raw Materials of Animal Origin Zhanna Petrova, Kateryna Samoilenko, Yuliia Novikova, Pavlo Petrov, Oleksandr Yurchak https://doi.org/10.23939/cte2025.01.389 pp. 389-394
The Influence of Polyethylene on the Thermophysical Properties of Fuel from Municipal Solid Waste Tetiana Korinchevska, Viacheslav Mykhailyk, Yurii Sniezhkin https://doi.org/10.23939/cte2025.01.395 pp. 395-398

Ecology and Sustainable Development. Environmental Protection
Increase the Reliability and Accuracy of Assessing the Ecological State of a Surface Water Body's Sub-Basin Svitlana Kovalenko, Roman Ponomarenko, Oleg Tretyakov https://doi.org/10.23939/cte2025.01.400 pp. 400-406
Fusel Oil and the Ecology of Road Transport Anatoliy Ludyn, Viktor Reutskyy, Volodymyr Reutskyy https://doi.org/10.23939/cte2025.01.407 pp. 407-4015
Evaluation of the Influence of Biosurfactants, Microbial Preparation, Sorbents on the Adaptive Capacity of Rye During Growth on Oil-Contaminated Soil Andriy Banya, Tetyana Pokynbroda, Nataliia Koretska, Olena Karpenko, Ihor Bobalo, Vira Lubenets https://doi.org/10.23939/cte2025.01.416 pp. 416-420
The impact of Biochar Amendments and Biostimulant on Soil Nematodes and Biomass Yield of Miscanthus on Poor-Nutritionally Soils of Post-Military Areas in Kyiv Region Anastasiia Husieva, Tatyana Stefanovska, Andrzej Skwiercz, Vitaliy Stadnik, Irina Artemchuk https://doi.org/10.23939/cte2025.01.421 pp. 421-427
Methods of Initial Assessment for Safety Secondary Application of Duroplastic Waste Matusiak Alicja, Zawadzka Ewa, Wacławek Stanisław, Silvestri Daniele, Alicja Wypiór https://doi.org/10.23939/cte2025.01.428 pp. 428-435
State Policy in the Field of Ecologization Trade-Logistics Centers Oleh Nahurskyi, Oleh Semenchuk https://doi.org/10.23939/cte2025.01.436 pp. 436-440
On Techno-Economic Analysis of Rapid Filtration of Groundwater with High Iron Content Vadym Poliakov, Serhii Martynov https://doi.org/10.23939/cte2025.01.441 pp. 441-445
The XPS-Revealed Difference in the Molecular Sorption Mechanism of Se(IV) and Se(VI) on Mg-Al-CO3 Layered Double Hydroxides (LDHs) Focusing on the Material Surface Speciation Natalia Chubar https://doi.org/10.23939/cte2025.01.446 pp. 446-451
Intelligent Flowmeter Based on the Film Method of Gas Flow Measurement for Environmental Monitoring Ivan Stasiuk, Ihor Dilai, Solomiia Markiv, Valentyn Shevchuk, Oksana Parneta https://doi.org/10.23939/cte2025.01.452 pp. 452-458
Granulated Slow-Release Fertilizers Based on Urea and Flue Gas Desulfurization Gypsum S. Schab, M. Borowik https://doi.org/10.23939/cte2025.01.459 pp. 459-463